Thermal Radiation 1000 Degree Anti-high-temperature Face shiled

Description

Item specifics
Material:
composite aluminized fireproof cloth, composite
aluminized pure cotton cloth , pure cotton sarcenet cloth.
Weight:
about 1.5 KG.
Size
: free.
Color:
silver.
Thermal Radiation
: 1000 degree.
Contact Resistance:
500-650 degree.
Type
: heat resistant.
Special Service:
stock supply.
Main performance indexes;
1 radiation reflectivity: can reflects more than 90% radiant heat.
2 flame retardant: damage length <=1cm, continued burning time<= 1s, smoldering time <=2 s;
3: the tearing strength: >=32N.
4 the breaking strength: >= 450N.
Features:
flame retardant, heat insulation, fire proof, wide vision, anti-radiation heat and etc.can be used under 300 degree for short time.
Application
:
oil, chemical, metallurgy, glass, furnace and other industries in which people need to face the molten iron sputtering.
Maintenance:
1.
使用后，要用软刷蘸中性洗涤剂液，刷洗表面残留污物，然后用清水冲洗干净，严禁用水浸泡和捶击。洗净后宜挂在通风处
1. after use, you need to scrub the surface residual dirt by a soft brush dipped in a neutral liquid , then rinse with clean water, forbid to soak it in water and thump. After cleaning, you should hang it in the ventilation place.
2.
耐高温头罩要放在干燥通风处，防止受潮霉
2.anti-high-temperature hood should be placed in a dry ventilated place, to prevent moisture, mildew and pollution.
注
Notice
：
1.
耐高温头罩虽然具有优良的耐高温隔热性能，但不可能在所有条件下都能起到保护人的作用。在靠近火焰区作业时，不能与火焰和熔化的金属直接接
1. although the high temperature resistant hood has excellent anti-high-temperature and heat insulation performance, but it can not play a protective role in all conditions. When working near the flame zone, it can’t be contacted with flame and molten metal directly!
2.
在使用前要认真检查有无破损、离层，如有严禁用于火场
2. before use, you must check it carefully to make sure whether there is a damage or separation. If there is, it is strictly prohibited to use it for fire operation.
One year warranty
.
Please feel free to contact with us if you have any question.
Summary of My Selling Policies