Seymour Duncan SH-5 Custom & SHPG - 1n Pearly Gates Humbucker Pickup Set schwarz

Description

Seymour Duncan SH-5 Custom & SHPG-1n Pearly Gates Humbucker Pickup Set Black
SH-5 Duncan Custom Bridge
Summary
A custom overwound P.A.F.-like humbucker with moderate output, perfectly voiced for supreme blues, rock, and metal.
Description
The Duncan Custom is a hot humbucker which uses a small ceramic magnet and custom-wound coils to dish out a ‘P.A.F.-on-steroids’ tone. It has tight lows, a bump in the upper midrange which gives you more character and crunch, and an airy high end that cuts through heavy distortion but is also great for achieving crystal-clear clean tones. It’s especially suited to warmer-sounding guitars with a prominent midrange, and many players like to use it in Les Pauls and Paul Reed Smiths. It pairs well with the Jazz or ’59 neck models, and forms one half of our ’59/Custom Hybrid humbucker.
Hand built in our Santa Barbara, CA factory, the Duncan Custom uses a small ceramic bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance.
Output
DCR:
14.1
Magnet:
Ceramic
Cable:
4c Shielded
SH-PG1n Pearly Gates Neck
Summary
P.A.F. style humbucker with a ton of rude Texas attitude for a neck tone that stays warm and focused.
Description
The Pearly Gates neck captures all the mojo of the original neck pickup from Billy Gibbons 1959 Les Paul. It is a P.A.F. with a unique tonal character, and more midrange than typical humbuckers from that time. The result is a neck pickup that cuts through with its stronger tailored mids, but still has the open and airy treble attack of the alnico 2 bar magnet. Combined with a warm, spongy low end, this pickup is great for both rhythm and lead playing. Pair with the Pearly Gates bridge model for a classic setup, or match it with a higher output bridge pickup like the Custom Custom for a more aggressive rock setup.Hand built in our Santa Barbara, CA factory, the Pearly Gates model humbucker uses an alnico 2 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance. As with all of our P.A.F. style humbuckers, every Pearly Gates is wound on Seymour’s original Leesona winding machine from the early Gibson factory in Kalamazoo, Michigan, for that unmistakable vintage mojo.
Output
DCR:
7.3
Magnet:
Alnico 2
Cable:
4c Shielded
Part Number:
11102-17-B_11102-45-B
You may be interested in
our other eBay listings
.