2Pcs 50MM Guitar Pickup Piezo Tranucer Prewired Amplifier with 6.35MM Outpu M4G1

Description

2Pcs 50MM Guitar Pickup Piezo Tranucer Prewired Amplifier with 6.35MM Outpu M4G1
The sound pickup is high-qua 50mm Piezoelric ceramic disc tranucer< />It is y large and can coll a wider range of sound in case you are not sure where are the best par of the sounds.< />This is a pre-wired, pre-soldered piezo and jack harness which make it easy for you. All you have to do is to attach the piezo in or on your build, drill a hole and mount the jack. Then you're done!< />Fit for most st music instrumen such as Guitar Mandolin box Guitar Ukulele Banjo, etc.< />Installation instruction:< />1 Take the plastic film down from the back of tranucer to eose the adhesive< />2 Place the tranucer through the sound hole to the lower part of the front body where the guitar produces the best tonal response< />3 Drill a hole from inside the body, loosen the end-pin jack , insert it to the hole and tighten the < />The above procedures depend on different instrumen.< />Specification:< />color:black< />Material: metal + plastic< />Cable long : approx 42cm/16.5 inch< />Plug Dia: approx 6.35mm/0.25 inch< />Package included:< />2 x Disc piezo pickup