27MM Guitar Pickup Piezo Tranucer Prewired Amplifier With 6.35MM Output Jacuu

Description

27MM Guitar Pickup Piezo Tranucer Prewired Amplifier With 6.35MM Output Jacuu
y easy to install and sounded good through seal different amps.< />Plug Dia. : 6.35mm/0.25 inch; Cable Length(Approx.) : 35cm/ 13.78 inch.< />Suitable for Guitar Ukulele Mandolin Banjo box Guitar.< />With the advantage of being able to eliminate intee external sounds and not be influenced by sound reflions from nearby obc.< />Material:Metal< />COLOR:black< />The sound pickup is high-qua 27mm Piezoelric ceramic disc tranucer< />It is y large and can coll a wider range of sound in case you are not sure where are the best par of the sounds.< />This is a pre-wired, pre-soldered piezo and jack harness which make it easy for you. All you have to do is to attach the piezo in or on your build, drill a hole and mount the jack. Then you're done! < />Fit for most st music instrumen such as Guitar Mandolin box Guitar Ukulele Banjo, etc.< />Installation instruction:< />1 Take the plastic film down from the back of tranucer to eose the adhesive< />2 Place the tranucer through the sound hole to the lower part of the front body where the guitar produces the best tonal response< />3 Drill a hole from inside the body, loosen the end-pin jack , insert it to the hole and tighten the < />The above procedures depend on different instrumen. < />Cable long : approx 32cm< />Plug Dia: approx 6.35mm/0.25 inch< />Package included:< />1x pickup< />4x gasket< />1x knob< />Note: Light ing and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.